The Main harness is removed by starting at each headlight, turn signal and side marker and working back. These are pictures of the installed harness working back from the front. The pictures show the air conditioner system still installed, but I did remove, seal and box that system before removing the main harness. Also the power harness and engine bay fuse box by the battery can be separated from the main harness at the fuse box. The fuse box wouldn't fit through the hole in the firewall anyway. You work each connector through the firewall one at a time.
The main harness runs across the inside of the firewall and connects to
some firewall mounted items items and a few grounds. It also runs
between the heater case and firewall. The heater case needs unbolted
and pried from the firewall padding. I left the harness connected to
the computer and fusebox.
I piled most of the parts in the back before boxing them up.
After moving the parts inside:
No comments:
Post a Comment